Product Series
All categories

EVA wear-resistant agent
Heavier ratio: 0.9-1.1.
Pollution: None.
Water points: 0.01%.
Storage: Dry at room temperature for at least two years.
Package: 25 kg box.
Function:
1. ZH-150 can improve the abrasion resistance and scratch resistance of the product, and improve the self-cleaning performance of the product. Compared with the traditional low molecular weight additives, the ultra-high molecular weight anti-wear agent will not reduce the mechanical properties of the product and will not migrate. , The surface of the product is not greasy and smooth.
2. Adding ZH-150 to EVA can reduce the coefficient of friction, reduce the amount of wear, and can greatly improve the wear resistance and scratch resistance of EVA.
Dosage: The original formula does not change, add 3-6PHR to each lot.
EVA wear-resistant agent

EVA special wear-resistant agent
Appearance: white particles.
Proportion: about 1.1.
Softening point: >50℃.
Mooney viscosity: ≦22.
Storage period: 1 year.
Packing: 25KG/carton.
Dosage and method: Add 3-8 PHR to the formula; normal dosage is 6 PHR.
Use effect: Effectively improve the abrasion resistance of EVA rubber foam. It has a significant effect in the DIN NBS abrasion test.
Note: It is effective for peroxide bridging system, but not significant for sulfur bridging system.
http://www.twxinhan.com
This guide is for reference only, because the process operation and use will exceed our control, so no promises can be made.
EVA special wear-resistant agent

Film release agent/anti-sticking agent
Ingredients: Emulsion of nanometer zinc stearate and dispersant.
Appearance: white paste.
Specific gravity: 1.03-1.12 (20°C).
Pollution: None.
Storage: Room temperature, dry for at least one year.
Packing: 50 kg drums.
Function:
1. Suitable for anti-sticking and isolation in the production and processing of various rubber and plastic products.
2. This product disperses extremely quickly in the water to form a uniform aqueous emulsion, does not float to form dust, and does not sink to block the pipeline.
3. After the mixed rubber passes through the water-based emulsion tank of this product, the product is evenly attached to the surface, which plays a role of anti-sticking during the stacking process of the rubber, and is absorbed by the rubber during the heating process. Active agent to promote vulcanization.
4. It is suitable for light-colored and transparent products, and has no adverse effect on the color.
Usage: directly mix with water and mix well after adding.
Dosage: ZH-101: water=1: 20-50.
Film release agent/anti-sticking agent

Mobile chew
Appearance: brown to brown particles.
Specific gravity: 1.0 (20°C).
Dropping point: 97±5°C.
Pollution: None.
Storage: Room temperature, dry for at least one year.
Packing: 25 kg paper bag.
Function:
1. A processing aid with lubricant effect and chewing effect.
2. It facilitates mixing and processing, and helps to disperse the compounding agent.
3. It helps to save energy and reduce mechanical wear due to lower operating temperature.
4. Because it contains fatty acid zinc, the consumption of stearic acid and zinc oxide can be reduced.
5. Reduce the situation of dry rubber sticking to the roller.
6. Increase the rate of extrusion and calendering, and make the surface smooth.
7. Increase injection molding output and reduce defect rate.
8. It can prolong the processing safety time, so it is allowed to increase the vulcanization temperature, and a higher output can be obtained.
Usage: Join with rubber.
Dosage:
General rubber: 2-5 PHR.
CR: 2-3 PHR.
Peroxide bridging: 2 PHR.
This guide is for reference only, because the process operation and use will exceed our control, so no promises can be made.
Mobile chew

Accelerator-ZDMC (PZ)
Molecular formula: C6H12 N2S4 Zn
Molecular weight M.W: 305.4
CAS Number: 137-30-4
Color: black and white particles
EINECS number: 205-288-3
performance:
1. The vulcanization speed of ZDMC in natural rubber and SBR, NBR, EPDM and other synthetic rubbers is very fast.
2. The addition of thiuram and thiazole accelerators can delay the initial vulcanization and improve processing safety.
3. Compared with pre-dispersed ZDBC, ZDEC and ZEPC, ZDMC has longer scorch time and shorter total curing time.
4. Alkaline accelerators have an activating effect on it, and a small amount of ZDMC can be used as a secondary accelerator for mercaptan or thiuram accelerators.
5. ZDMC can improve the tensile strength and resilience of vulcanizates. Antioxidants should be added to NR and IR to improve heat resistance.
Dosage: NR: 0.6~1.0 parts; used as a secondary accelerator: 0.1~0.2 parts;
NBR: 1.0~3.0 parts; used as a secondary accelerator: 0.1~0.2 parts;
Packing: 25kg carton packing
Accelerator-ZDMC (PZ)

Accelerator-TBZTD
Molecular formula: C6H12 N2S4 Zn
Molecular weight M.W: 305.4
CAS Number: 137-30-4
Color: black and white particles
EINECS number: 205-288-3
performance:
1. The vulcanization speed of ZDMC in natural rubber and SBR, NBR, EPDM and other synthetic rubbers is very fast.
2. The addition of thiuram and thiazole accelerators can delay the initial vulcanization and improve processing safety.
3. Compared with pre-dispersed ZDBC, ZDEC and ZEPC, ZDMC has longer scorch time and shorter total curing time.
4. Alkaline accelerators have an activating effect on it, and a small amount of ZDMC can be used as a secondary accelerator for mercaptan or thiuram accelerators.
5. ZDMC can improve the tensile strength and resilience of vulcanizates. Antioxidants should be added to NR and IR to improve heat resistance.
Dosage: NR: 0.6~1.0 parts; used as a secondary accelerator: 0.1~0.2 parts;
NBR: 1.0~3.0 parts; used as a secondary accelerator: 0.1~0.2 parts;
Packing: 25kg carton packing
Accelerator-TBZTD

Accelerator-MBT
Molecular formula: C6H12 N2S4 Zn
Molecular weight M.W: 305.4
CAS Number: 137-30-4
Color: black and white particles
EINECS number: 205-288-3
performance:
1. The vulcanization speed of ZDMC in natural rubber and SBR, NBR, EPDM and other synthetic rubbers is very fast.
2. The addition of thiuram and thiazole accelerators can delay the initial vulcanization and improve processing safety.
3. Compared with pre-dispersed ZDBC, ZDEC and ZEPC, ZDMC has longer scorch time and shorter total curing time.
4. Alkaline accelerators have an activating effect on it, and a small amount of ZDMC can be used as a secondary accelerator for mercaptan or thiuram accelerators.
5. ZDMC can improve the tensile strength and resilience of vulcanizates. Antioxidants should be added to NR and IR to improve heat resistance.
Dosage: NR: 0.6~1.0 parts; used as a secondary accelerator: 0.1~0.2 parts;
NBR: 1.0~3.0 parts; used as a secondary accelerator: 0.1~0.2 parts;
Packing: 25kg carton packing
Accelerator-MBT

Accelerator NA22
Color: off-white particles
1. Pre-dispersed ETU-80 makes neoprene fast vulcanized and scorched safely. It can be used as activator and secondary accelerator for low-sulfur or non-sulfur vulcanization of other diene rubbers.
2. Pre-dispersed ETU-80 can improve the heat aging and physical and mechanical properties of vulcanizates, and generally will not bloom. To
Processing: Under normal circumstances, powdered ETU is easy to fly and adhere to the equipment, and it is not easy to disperse evenly during mixing. However, pre-dispersed ETU-80 is easy to compound and mix; it will not agglomerate under normal storage conditions; it has good fluidity, no dust, and will not cause feeding loss. It is easy to eat in various rubber compounds and is evenly dispersed, ensuring The best activity of the effective component ETU. It is recommended to add it at the end of mixing.
Dosage: 0.1 ~ 2 phr
Application: General-purpose accelerator for various products of chloroprene rubber, CSM, and CPE.
Packing: 25kg carton packaging
Storage stability: Store in a cool, dry place, sealed in the original package for 12 months.
Accelerator NA22

Accelerator
1. Chemical name: Dicumyl peroxide
2. Physical properties
Appearance: white flowing crystalline solid with a faint odor
Flammability: Decomposition is combustible
Water solubility: insoluble (20℃)
Melting point: 39.5℃
Density: 1110kg/m3 (20℃)
Bulk density: 660kg/m3
PH value: neutral
Solubility in other solvents: soluble in most organic solvents
Active oxygen content: 5.8%
Peroxide content: 99%
3. Packing: 25KG
Four. Storage:
Store in a dry and ventilated place, avoid direct sunlight and heat sources, and the storage temperature should not be higher than 30°C
Accelerator

Bridging agent
2. Physical properties
Appearance: white flowing crystalline solid with a faint odor
Flammability: Decomposition is combustible
Water solubility: insoluble (20℃)
Melting point: 39.5℃
Density: 1110kg/m3 (20℃)
Bulk density: 660kg/m3
PH value: neutral
Solubility in other solvents: soluble in most organic solvents
Active oxygen content: 5.8%
Peroxide content: 99%
3. Packing: 25KG
Four. Storage:
Store in a dry and ventilated place, avoid direct sunlight and heat sources, and the storage temperature should not be higher than 30°C
Bridging agent
Previous page
1
Next page
Search

Visit mobile station
Copyright © XinHan Rubber Technology (Shenzhen) Co.,Ltd All Rights Reserved
粤ICP备14000150号
Powerby:300.cn